Thermally stabilized synthetic fiber tape impregnated with a special non-hardening mastic. It seals threaded hydraulic fittings of any diameter and material, both with common gas and with drinking and heating water. In fact, it does not alter either the odor, taste or purity of water. It is a dynamic sealant in that adapts to all threads and materials. Suitable on tapered and parallel threads. SST is clean and hands-free, cheap, quick and easy to apply. It allows fittings to be repositioned and disassembled years later. It withstands vibrations typical of couplings, in the surroundings of pumps. SST complies with the technical specifications according to UNI EN 751/2 Cl. Arp, and is WRAS certified according to BS 6920 and DVGW.
Apply normally as an ordinary sealing tape to the thread, putting the green part of the tape in contact with the thread by exerting a slight tension and preferably starting from the end of the thread in the direction of the thread and going back outward covering the entire thread. In most cases it is not necessary to roughen or dent the thread, except on particularly smooth materials such as brass or chrome-plated fittings. In any case, use according to experience. Tears off by simply pulling it without the need to cut it. It allows repositioning of the fitting. Once the fitting has been loosened within certain limits it can be tightened again. Do not exceed in quantity as some of the tape may be ejected (demonstration film available on YouTube).
| Code | Contents | Qt. | pz/pallet. |
|---|---|---|---|
| SSTBLI1405 | blister H 14 mm x 5 m | 42 | 2520 |
Dynamic universal sealant for threaded fittings consisting of pure 100% PTFE thread resistant up to 240 °C.
Thermally stabilized synthetic fiber tape impregnated with a special non-hardening mastic
